FISHER CZ-3d TARGET ID METAL DETECTOR
Specifically designed to find more good metals such as brass, bronze, copper and silver, reporting it as a high-tone, rather than a mid-tone object. The CZ-3D is engineered to provide maximum success on old coins while retaining the best possible ratio of good targets vs. trash targets. In older era sites, where aluminum trash is minimum, the CZ-3D will give exceptional performance on older coins. Simply select the 'enhanced mode' with the 'salt/enhanced' switch. No special programming required - just flip the switch and see what you've been missing!
DISC: seven preset discrimination points plus all-metal auto tune position
PINPOINT: Pushbutton for pinpointing, depth reading and ground balancing(in conjunction with ground control)
SENSITIVITY/BATTERY TEST: Dual function potentiometer and switch
MODE: two position switch: "Enhanced" position and "Salt" position for wet, salt water beaches
GROUND BALANCE: potentiometer
POWER ON/OFF VOLUME: Dual-fuction potentiometer and switch. volume settings above midrange amplify faint, deep target sounds and limit loud target responses.
Visual target ID, Enhanced for more coins
Four tone, audio target ID
Pushbutton ground adjust
Big target alert
Increased depth in mineralized soil
Turn on & go preset control markings
Wet sand mode
Faint target audio boost
Eight inch open center spider coil
Three piece breakdown handle
Handle mount or hip mount
Silent-search, VLF slow motion discrimination
Super hot, wide scan, all metal auto tune mode
Limited Lifetime Warranty
Frequency: Multiple-Frequency transmit, Dual Frequency Processing
VLF Search...5 KHz and 15 KHz
LENGTH: Extended...51" Collapsed:...41"
WEIGHT: 3.7 lbs.
OPERATING MODES:Target ID, All Metal
BATTERIES:Drop in...Two, 9-Volt Alkaline
PINPOINT: VLF, all metal, no motion
SEACHCOIL: 8" CONCENTRIC, Open Spider Coil
WARRANTY: 5 Years